Solving Miscellaneous Printout Problems - Epson Photo 700 User Manual

Multiple pages feed at the same time
Try this
Remove the stack of paper
from the printer.
Characters are incorrect or garbled
Possible cause
Your printer is not the
Windows default printer.
Your printer is not selected
in the Macintosh Chooser.
If you're using background
printing on a Macintosh,
spooled data may be
corrupted.
AppleTalk is activated on a
Macintosh.
Printing is stalled.
Then do this
Make sure the paper isn't too thin (see the paper specifications
on page B-2).
Fan the edges of the stack of paper to separate the sheets.
Reload the paper as described in the Getting Started guide and
in Chapter 3.
Make sure the paper edge guides are snug against the edge of
the paper.
If too many copies of a page or document are printing, check
the Copies settings in both the printer software and your
application program. See page 2-12 (Windows) or page 2-17
(Macintosh) for more information.
Solving Miscellaneous Printout
Problems
If your printout results are not what you expected, try these
solutions.
Solution
Select your printer as the default Windows printer. See your
Windows documentation or Windows online help for instructions.
Open the Chooser and select your printer. See the Getting Started
guide for instructions.
Open the Extensions folder, EPSON folder, and Spool folder. Then
delete any queued files. Increase the memory requirements for
EPSON Monitor3, following the instructions on page 4-14.
If your printer is connected to the printer port, open the Chooser
and make sure AppleTalk is inactive. Then turn your computer off
and back on.
In Windows, delete the stalled print jobs in Spool Manager (see
page 4-4 for instructions). On a Macintosh, select the stalled print
jobs in EPSON Monitor3 (see page 4-15) or open the Extensions
folder, EPSON folder, and Spool folder, and then delete any
queued files.
6-17
Troubleshooting