Epson Stylus 1520 User Manual page 20

Buttons
,
Micro Adjust
7
Micro Adjust
Alt
Alt + LF/FF
(Black print
head cleaning)
Alt + Load/Eject
(Color print
head cleaning)
1-4
Getting to Know Your Printer
Function
Adjusts the loading position or tear-off position for
continuous paper. Press the Micro Adjust
feed paper forward or press Micro Adjust
paper backward. Micro Adjust settings are saved in
the printer's memory. See Chapter 7 for details on
adjusting the loading position or tear-off position.
Moves the carriage to the ink cartridge install position
if held down for about three seconds while printing is
paused. The Pause light begins flashing. Press this
button again to move the carriage back to its home
position and start charging ink in the system. See
"Replacing an Ink Cartridge" on page 9-2 for details.
Activates the secondary functions of other buttons,
as described below, if you press another button while
holding down the Alt button.
Starts the black print head cleaning cycle. See
"Cleaning the Print Heads" on page 10-36 for details.
Note:
Cleaning the print heads uses ink. Don't do it unless print
quality declines.
Starts the color print head cleaning cycle. See
"Cleaning the Print Heads" on page 10-36 for details.
Note:
Cleaning the print heads uses ink. Don't do it unless print
quality declines.
,
button to
7
to feed