For DOS users:
The print direction setting is
set to Bi-D in the
default-setting mode.
The printed image is smeared.
Cause
The paper you loaded is too
thick.
Special paper was loaded
without the support sheet or
a regular sheet of paper
under it. Glossy film, glossy
paper, and transparencies
should be loaded with the
support sheet or a piece of
plain paper under them.
Multiple sheets of EPSON
Photo Quality Glossy Film
are loaded.
10-26
Troubleshooting
Set the print direction to Uni-D in the
default-setting mode. To enter the
default-setting mode, see "Changing
the default settings" in Chapter 8.
What to do
Open the printer cover and set the
adjust lever to the "+" position. See
Chapter 7, "Paper Handling."
Load the support sheet or a piece of
plain paper under the special paper.
See Chapter 7, "Paper Handling," or
the instructions packed with your
paper.
Load glossy film one sheet at a time
with the loading support sheet or a
piece of plain paper under the glossy
film.
If you need to load multiple sheets of
glossy film, load only up to 30 sheets
and set the top margin of the page to
30 mm or more.