Resizing Video Images - Epson BrightLink 450Wi User Manual

note
You cannot change the
aspect ratio when displaying
from a computer using the
USB port or from a
TypeB
USB device using the
USB
source.
Displaying and Adjusting the Image
46

Resizing Video Images

You can resize your images by changing the aspect (width to height)
ratio (depending on your input signal).
Press the button on the remote control. Press the
Aspect
button repeatedly to cycle through the available options.
Select from one of these
■ Displays images using the full projection area and
Normal:
maintains the aspect ratio of the image. Choose this setting to
automatically resize the image and make the best use of the
display area.
■ Converts the aspect ratio of the image to 16:9. 4:3 ratio
16:9:
images are elongated horizontally to fit.
■ Displays images using the full width of the projection area,
Full:
but does not retain the aspect ratio. 4:3 ratio images are elongated
horizontally.
Displays images using the full width of the projection area
■
Zoom:
and maintains the aspect ratio of the image. The image may be
cut off on the top and bottom depending on its aspect ratio.
■ Displays images as is (aspect ratio and resolution are
Native:
maintained). Black bands may appear or images may be cut off,
depending on the resolution.
If you are using the interactive pens, you will have to recalibrate after
changing the projector's aspect setting.
Aspect
button
options:
Aspect
Aspect