Epson BrightLink 450Wi User Manual page 78

note
If is
Direct Power On
enabled, the power cord is
connected, and a power
outage occurs, the projector
will start when the power is
restored.
note
Do not use the projector at
altitudes above 7,500 feet
(2,286 meters).
Using the Projector Menus
78
■
Operation
Direct Power On:
projector when you connect the power cord (without pressing the
Ppower button).
: Enable if you want the projector to turn off
Sleep Mode
automatically if it is idle and no signal is received for 1 to 30
minutes (you can adjust the amount of time using the next
setting).
Sleep Mode Timer
period of time before the projector turns off automatically, from
1 to 30 minutes.
High Altitude Mode
above 4,900 feet (1,500 meters) to ensure that the temperature is
regulated properly. Turn this setting off for lower elevations.
■
Standby Mode
Select
Communication On
monitored and controlled from a computer when it is in standby
mode (the power light is orange). This setting also allows you to
use a microphone connected to the projector when the projector
is in standby mode.
■
USB Type B
Select how you want to use the
Select
USB Display
images. Select
Wireless Mouse
buttons like a wireless mouse. See page 64 for restrictions and
details.
■
Language
Select a language to use for the projector menus and messages. To
change the language, press the
control, highlight
and press , then select your language and press
Enter
Enable if you want to be able to start the
: When Sleep Mode is on, you can set the
: Enable when you are using the projector
to enable the projector to be
TypeB
to use the USB port to project computer
to use the remote control
button on the remote
Menu
and press
Extended Enter
(square) USB port.
, select
Language
.
Enter