Rear - Epson EMP EMP-1825 User Manual

Part Names and Functions

Rear

A J I H G
B C D
Name
A
Monitor Out port Outputs the image signal from the computer
connected to the Computer1 input port to an
external monitor. This is not available for
component video
being input to any port other than the
Computer1 input port.
Audio Out port Outputs the sound of the image currently being
projected to external speakers.
p.94
s
B
Power inlet Connects to the power cable. s Quick Start
Guide
C
S-Video input
For S-video
port
Video input port
For composite video
sources.
F
E
Function
g signals or other signals
g signals from video sources.
g signals from video
Name
Audio-L/R input These connect to the audio out port of
port
equipment that is connected to the S-Video or
Video input port. s Quick Start Guide
D
RS-232C port When controlling the projector from a
computer, connect it to the computer with an
RS-232C cable. This port is for control use and
should not normally be used. s
E
Remote receiver Receives signals from the remote control.
s Quick Start Guide
F
Security slot (j) The security slot is compatible with the
Microsaver Security System manufactured by
Kensington. s
G
USB port (Type A) Connects the memory for compatible digital
(EMP-1825 only)
cameras and USBs, and projects image/movie
files and scenarios with the PC Free of
EasyMP. s
H
LAN port When a LAN cable is connected, you can
(EMP-1825 only)
monitor and control the projector over a LAN.
p.95
s
I
USB port (Type B) Connects the projector to a computer by a
USB cable, and the image on the computer is
projected (EMP-1825 only). s Wireless LAN
Quick Connection Guide
Use this port also to connect with a computer
to use the wireless mouse function. s
J
Computer1 input For video signals from a computer and
port
component video
sources.
Audio1 input port Connect to the audio out port of the computer
connected to the Computer1 input port.
Function
p.99
p.40
p.91
p.30
signals from other video
g
10