Wired Lan Menu - Epson EMP EMP-1825 User Manual

List of Functions

Wired LAN Menu

f
Sub Menu
DHCP g You can set whether to use DHCP (On) or not (Off).
If this is set to "On" you cannot set any more addresses.
IP address g
You can input the IP address assigned to the projector.
You can enter a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet mask g You can input the subnet mask for the projector. You can input a number from 0 to 255 in each field of the address. However, the following subnet
masks cannot be used.
0.0.0.0, 255.255.255.255
g
Gateway address You can input the IP address for the gateway for the projector.
You can enter a number from 0 to 255 in each field of the address. However, the following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
MAC Address Indicates the MAC Address.
IP Address Display To prevent the IP address from being displayed on the Standby screen, set this to "Off".
Function
61