Signal Menu - Epson EMP EMP-1825 User Manual

List of Functions

Signal Menu

Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each
image signal.
Computer image
Sub Menu
Auto Setup You can select whether, when the input signal changes, the image is automatically adjusted to the optimum state (On) or not (Off). s
Tracking g You can adjust computer images when vertical stripes appear in the images. s
Sync. g
You can adjust computer images when flickering, fuzziness, or interference appear in the images. s
Position You can adjust the display position up, down, left, and right when a part of the image is missing so that all of the image is projected.
Progressive g (Component video can only be adjusted when 480i/576i signals are being input)
Off: IP conversion is carried out for each field in the screen. This is ideal for viewing images with a large amount of movement.
On: interlace
Computer1 Input You can select the input signal from the Computer1 input port or Computer2 input port.
If set to "Auto" the input signal is set automatically according to the connected equipment.
If colors do not appear correctly when set to "Auto", select the appropriate signal according to the connected equipment.
Computer2 Input
Video Signal If set to "Auto", video signals are recognized automatically. If interference appears in the image or a problem occurs such as no image is being
projected when set to "Auto", select the appropriate signal according to the connected equipment.
Resize You can set the aspect ratio
Reset You can reset all adjustment values on the "Signal" menu to their default settings, except for "Computer1 Input" and "Computer2 Input".
To return all menu items to their default settings, see s
Component video
g
(i) signals are converted into progressive (p) signals. This is ideal for viewing still images.
g
for projected images. s
g
Function
p.75
p.27
p.66
Composite video g /S-video g
p.75
44
p.75