Important Safety Information - Sharp AR-FX7 Operation Manual

This equipment has been tested according to the pan-European TBR 21 regulation. It
will operate on all analogue telephone networks which comply with the TBR 21.
Please contact your dealer or network operator, if you are not sure whether your
network operates according to TBR 21.
• This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
This equipment complies with the requirements of Directive 1999/5/EC.

Important safety information

• If any of your telephone equipment is not operating properly, you should
immediately remove it from your telephone line, as it may cause harm to the
telephone network.
• The AC power outlet shall be installed near the equipment and shall be easily
accessible.
• Never install telephone wiring during a lightning storms.
• Never install telephone jacks in w et locations unless the jack is specifically
designed for wet locations.
• Never touch uninsulated telephone wires or terminals unless the telphone line has
been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightning.
• Do not install or use the machine near water, or when you are wet. Take care not to
spill any liquids on the machine.
Note
• This operation manual (fax function) describes the AR-M236/AR-M276
model with optional reversing single pass feeder (AR-RP7), optional job
separator tray kit (AR-TR3), and optional facsimile expansion kit (AR-FX7)
installed. Depending on the model you have and on the options installed,
some of the illustrations in this manual may be different, however, the basic
operations are the same.
• This manual (fax function) refers to the Reversing Single Pass Feeder as
the "RSPF".