Priority Transmission Of A Stored; Job - Sharp AR-FX7 Operation Manual

PRIORITY TRANSMISSION OF A
STORED JOB
If you have an urgent transmission job and multiple transmission jobs have already been stored, you can give
priority to the urgent job so that it will be transmitted immediately after the job currently being transmitted. This is
done in the job status screen. For details on using the job status screen, refer to operation manual for copier.
1
Press the [JOB STATUS] key.
LINE
FAX
DATA
CUSTOM SETTING
JOB STATUS
2
Touch the [FAX JOB] key.
WAITING
DETA
WAITING
PRIOR
WAITING
STOP/D
FAX JOB
3
Touch the job key of the transmission
job to which you wish to give priority.
The selected key is highlighted.
The job status is indicated as follows:
Note
CONNECTING ... The job currently in
WAITING ............ Stored job waiting to be
T XXX XX:XX ..... Job stored with a timer
RETRY MODE ... Job waiting to be recalled
The fax transmission
status and stored jobs
appear.
progress
executed
setting
4
Touch the [PRIORITY] key.
ITING
DETAIL
ITING
PRIORITY
ITING STOP/DELETE
X JOB
If a job key for a broadcast-type transmission is
selected, the name or number of the destination to
which the fax is currently being transmitted appears. If
the job has not yet begun, the name or number of the
first destination to which the fax will be transmitted
appears. To return to the job status screen, touch the
[DETAIL] key again or touch the
The [PRIORITY] key appears when there
Note
are at least two stored jobs in addition to the
job in progress.
The selected job moves
to the position
immediately following the
job currently being
transmitted.
Transmission of the
priority job will begin
when the current job
finishes.
or key.
23
2