Sharp AR-FX7 Operation Manual page 92

TROUBLESHOOTING
Reception problems
Problem
Reception does not take
place at the specified time.
Printing does not take place
after reception.
A received image prints out
blank.
The received image is faint.
The received image is
distorted.
A ringing sound is not made.
Telephone problems
Problem
The line and dialing sounds
cannot be heard clearly
through the speaker.
No ringing sound
90
Cause and solution
The machine's clock is not set to the correct time.
→ Set the clock to the correct time.
A message appears in the display instructing you to
add toner or paper.
→ Restore printing capability as instructed by the display
message. Printing will begin.
The wrong side of the original was scanned in the
transmitting machine.
→ Check with the operator of the transmitting machine.
The original is faint.
→ Ask the other party to resend the document using a
suitable exposure setting.
The line conditions were poor due to thunder or
other reason.
→ Ask the other party to send the document again.
The ringer volume has been turned off.
→ Set the ringer volume to low, medium, or high.
Cause and solution
The speaker volume is set to low.
→ Change the volume to medium or high.
The ringer volume has been turned off.
→ Set the volume to low, medium, or high.
Page
operation manual for
copier
87
-
-
-
99
Page
99
99