Connecting The Telephone Line Cord - Sharp FO-51 Operation Manual

Connections

Connecting the telephone line cord

Insert one end of the telephone line cord into the adapter. Insert the other end
of the line cord into the socket on the back of the machine marked TEL. LINE.
Plug the adapter into the telephone socket on the wall.
For Australia
For New Zealand
Dial mode:
The fax machine is set for tone dialling. If you are on a pulse dial line, you must set the
fax machine for pulse dialling. Press the keys on the operation panel as follows:
1
FUNCTION
Press
2
Press
3
Select the dial mode:
TONE:
1
STOP
4
Press
Note: For all units installed in New Zealand, select "1" for tone dialling. The pulse
setting "2" will not operate correctly and must not be used.
Comments:
♦
The fax machine is not designed for use on a line which has call waiting,
call forwarding, or certain other special services offered by your telephone
company. If you attempt to use the fax machine in conjunction with any of
these services, you may experience errors during transmission and
reception of facsimile messages.
♦
The fax machine is not compatible with digital telephone systems.
♦
If your area experiences a high incidence of lightning or power surges, we
recommend that you install surge protectors for the power and telephone
lines. Surge protectors can be purchased from your dealer or at most
telephone specialty stores.
12
once and once.
4
4 times.
PULSE:
2
to exit.
Display:
OPTION SETTING
DIAL MODE