Searching For An Auto-Dial Number - Sharp FO-51 Operation Manual

Searching for an auto-dial number

If you don't remember the Rapid Key or Speed Dial number in which you have
programmed a particular fax number, you can search for the number by following
the steps below. Once you have found the number, you can dial and transmit the
loaded document by simply pressing
1
Load the document(s).
•
If desired, press
resolution and/or contrast.
HOLD/
2
SEARCH
Press
3
Enter the first letter of the stored name by pressing the appropriate
number key (the key below the marked letter) one or more times until the
letter appears in the display. If the name begins with a special character
or number, press
•
If you don't remember the first letter, go to Step 4 (you will scroll through the
list from the beginning).
•
If a name wasn't stored for the number, press
numbers, not names, to appear when you scroll.
4
Press or
0). Stop when the desired name appears in the display.
5 START
Press . The document will be automatically transmitted once the
connection is established.
START
RESOLUTION/
RECEPTION MODE
to set the
and then .
1
.
1
to scroll through the names (numbers if you pressed
Sending a Fax by Automatic Dialling
.
READY TO SEND
. This will cause
0
37