Sharp FO-51 Operation Manual page 17

4
Unwrap the roll of thermal paper and
insert the paper shaft.
5
Place the roll of thermal paper in the
compartment, making sure the ends of
the paper shaft fit into the notches on
each side of the compartment.
•
Important: The roll must be placed so
that the leading edge of the paper
unrolls as shown. (The paper is only
coated on one side for printing. If the roll
is placed backwards, the paper will
come out blank after printing.)
6
Insert the leading edge of the paper
into the slot as shown. Continue to
push the paper through the slot until it
comes out the opening in the front of
the machine.
7
Make sure the paper comes out
straight, and then flip down the paper
guide.
Loading the Thermal Paper
YES
NO!
15