Craftsman 17125455 Operating Instructions Manual page 19

5 If the screws look like Screw "a" or Screw "b", use either
three or four of the 13/64" ID x 15/32" OD washers when
installing the adapter plate to the router as shown in
Figure 27
6 Your Dovetail Jig comes with four countersunk bushings
with an 11/64" hole and four countersunk bushings with a
13/64" hole Refer to Figure 28
FIGURE 27
7 If the screws look like Screw "c", use either three or four
of the bushings with an 11/64" din hofe when installing
the adapter plate to the router as shown in Figure 29
8 If the screws look like Screw "d", use either three or four
of the bushings with a 13/64" dia hole when installing the
adapter plate to the router as shown above in Figure 29
FIGURE 28
SCREW
PAN HEAD
SCREW
, PAN HEAD SCREW
i/WASHER
//PAN HEAD SCREW
(_jWASHER
4
4
0 11/32
--O t1/64
O 25/64
F O 13/64
FIGURE 29
HEAD
SCREW
BUSHING--.-.
WITH Oll/64
HOLE
SCREW
BUSHING
Oll/64 HOLE
d_ #8 FLAT HEAD SCREW
'_ BUSHING WITH Otl/64 HOLE
"-_,\ _j #8 FLAT HEAD SCREW
\, '0_ / BUSHING WITH
\ _/Oll/64 HOLE
PLATE
19