Communication Through An Rs-232 Or Usb Port - Dell PowerEdge UPS 500T Installation And Configuration Manual

Communication Through an RS-232 or USB Port

The VMware server works in console mode and cannot be used for configuration. Use a remote Agent
with the same Dell UPS Management Software version to configure the VMware server.
1 Start the manager interface on the remote software Agent in the Microsoft Windows operating system.
2 If the two Agents are in the same LAN, the VMware server client will be added to the topology
automatically; otherwise, add the Agent manually (select Monitor Remote Device from the Monitor
menu).
The software automatically searches for the UPS when the Agent starts for the first time after
installation.
If the search fails:
• Select the VMware Server Agent from the tree view.
• Acting as the Administrator, select Auto Search Device from the System menu. The UPS
connected with VMware Server appears in the LAN tree view (see Figure 113).
Figure 113. UPS Connected to the VMware Server
Installation on a VMware ESX Server
112