Dell PowerEdge UPS 500T Installation And Configuration Manual page 133

Table 6. Dell CUI Commands (Continued)
Command
search4
search6
shutbackup
shutfile
shutlow
Description
Purpose: Search IPv4 SNMP devices
Format: search4 [ip target_ip] [-ip target_ip] [-c community]
Options: -ip target_ip:
-c community
Examples: search4 -ip 172.18.127.1 -ip 172.18.127.254 -c public
search4 (using default options value)
Purpose: Search IPv6 SNMP devices
Format: search6 [-ip target_ip] [-c community]
Options: -ip target_ip:
-c community
Examples: search6 -ip ff02::1 -c public
search6 (using default option value)
Purpose: Show or Set message of "Allow battery to discharge for"
Format: Usage: shutbackup [-ip target_ip] [-e boolean] [-m time]
Options: -ip target_ip:
-e boolean:
-m time:
NOTE: No options show relative messages of device.
Example: shutbackup -ip 172.18.127.123 -e true -m 10:10
Purpose: Show or Set message of "Run Command File before Shutdown"
Format: shutfile [-e boolean] [-f file] [-m time]
Options: -e boolean:
-f target_file:
-m time:
NOTE: No options show relative messages of device.
Example: shutfile -e true -f abc.bat -m 2
Purpose: Show or Set message of "Begin Shutdown Immediately if Battery Low"
Format: shutlow [-ip target_ip] [-e boolean]
Options: -ip target_ip:
-e boolean:
NOTE: No options show relative messages of device.
Example: shutlow -ip 172.18.127.123 -e true
IPv4 address (default is 255.255.255.255)
SNMP communication authorization (default is public)
IPv6 address (default is ff02::1)
SNMP communication authorization (default is public)
IPv4 or IPv6 address
true - enable, false - disable
minute:second (range 0:0 - 999:59)
true - enable, false - disable
Execute file name before shutdown
minute: (range 1 - 60)
IPv4 or IPv6 address
true - enable, false - disable
Installation on a VMware ESXi Server
133