Hitachi XP P9500 User Manual page 346

3. Creating an HDLM Environment
title Red Hat Enterprise Linux AS (2.6.9-11.EL)
LogVol00 rhgb quiet
#
8. Copy the configuration that was used for startup from the HDLM device.
9. Assign a name to the copied configuration.
You can assign any name that indicates that the configuration is used for
specifying the SCSI device.
Change
label
LILO is the boot loader, you must then execute
activate the new setting.
Change
title
10. In , specify the SCSI device you checked in step 3.
root
If you are using a kernel that supports Xen on SUSE LINUX Enterprise Server
10, add the root device by using the definition conventions for the boot loader
configuration file.
When LVM2 is used, specify
/etc/fstab
If LVM2 is not used in Red Hat Enterprise Linux 6, a block device name starting
with
UUID=
the block device name starting with
If LVM2 is not used in SUSE LINUX Enterprise Server 10, you can also use the
device name (
correspondence between the SCSI devices and the device name (
the
/dev/disk
11. In
initrd
If you are using a kernel that supports Xen on SUSE LINUX Enterprise Server
10, change the
322
kernel /vmlinuz-2.6.9-11.EL ro rhgb quiet
initrd /initrd-hdlm-2.6.9-11.EL.gz
root (hd1,0)
kernel /vmlinuz-2.6.9-11.EL ro root=/dev/VolGroup00/
initrd /initrd-hdlm-2.6.9-11.EL.img
initrd /initrd-2.6.9-11.EL.img
if the boot loader is LILO, or ELILO running on an IPF host. If
if you will use GRUB as the boot loader.
root
file.
can be used. To check the correspondence between a SCSI device and
name) in the
udev
directory, see step 5.
, specify the initial RAM disk image file for the SCSI device.
file name specified in
initrd
/sbin/lilo
as the name of the device mounted to
, see step 5.
UUID=
directory. To check the
/dev/disk
to the initial RAM disk
module
command to
in the
/
name) in
udev