Hitachi XP P9500 User Manual page 659

For details on the
HDLM Error Information.
KAPL10935-W
An internal error occurred in the file operation. File name = /
etc/opt/DynamicLinkManager/hdlm_utillog.conf. Execute the
DLMgetras utility to collect error information, and then contact
your vendor or maintenance company.
Details
An internal error occurred during operations of the settings file for the HDLM
utility log (
maximum log file size of 1024 KB will be assumed, and the processing of the
dlmcfgmgr
Action
Execute the
contact your HDLM vendor or the maintenance company if there is a maintenance
contract for HDLM.
For details on the
HDLM Error Information.
KAPL10936-W
The file format is invalid. File name = /etc/opt/
DynamicLinkManager/hdlm_utillog.conf. Refer to the Messages
section of the HDLM User's Guide for instructions to correct this
problem.
Details
The format of the settings file for the HDLM utility log (
DynamicLinkManager/hdlm_utillog.conf
size of 1024 KB will be assumed, and the processing of the
will continue.
Action
Execute the
occurs again,
which is not a regular file might exist. Delete
DynamicLinkManager/hdlm_utillog.conf
dlmcfgmgr
7.3 dlmcfgmgr Utility for Managing the HDLM Configuration.
KAPL10937-W
The maximum number of paths was exceeded. Revise the
configuration so that the number of paths is less than, or the
utility, see 7.2 DLMgetras Utility for Collecting
DLMgetras
/etc/opt/DynamicLinkManager/hdlm_utillog.conf
utility will continue.
utility for collecting HDLM error information, and then
DLMgetras
utility, see 7.2 DLMgetras Utility for Collecting
DLMgetras
utility with the
dlmcfgmgr
/etc/opt/DynamicLinkManager/hdlm_utillog.conf
utility again. For details on the
/etc/opt/
) is invalid.A maximum log file
dlmcfgmgr
parameter specified. If the error
-logfs
/etc/opt/
and then execute the
utility, see
dlmcfgmgr
8. Messages
). A
utility
635