Running The System Setup; Getting Antenna Information - Hitachi 61HDX98B User Manual

GETTING ASSISTANCE
RUNNING THE SYSTEM SETUP
You should have completed the system setup the first time you plugged in your TV.
However, if you need to access the system setup again, you can access it through
the Assistance menu.
1. Press MENU on the remote control to access the main menu.
2. Select Assistance from the main menu.
3. Select System Setup and follow the on-screen directions.
The system setup process allows you to complete all steps or selectively skip
steps.
The steps involved in the interactive setup include:
• Setting the time and date
• Searching for channels
• Setting up speakers
• Selecting an audio processor
• Specifying your satellite dish antenna type
• Running the system test
Note that if you do not subscribe to DIRECTV® programming, you can select "Skip
this step" for specifying satellite dish antenna type and running the system test.
GETTING ANTENNA INFORMATION
The Antenna Info menu helps you measure the strength of all availableTV
channels. It will help you adjust any terrestrial TV antennas. (The actual adding of
channels is done by using the Auto Chan Set menu.)
To access the Antenna lnfo menu:
1. Press MENU to bring up the main menu.
2. Select Assistance.
3. Then select Antenna Info.
A dialog box reports the status of the signal search and lists channels that are being
received or have been received from all terrestrial antennas. To switch between
antennas, highlight any channel and then press ANT on the remote control.
81