Initialization Of Box Setting Information - Panasonic AF-FX100 Setup Instructions

"Initialization of BOX setting information" (+ page 26) is executed and parameters are reset in accordance with
installation environment.
Note:
• When "Update of the image recognition library" is executed, be sure to execute "Initialization of BOX setting
information".
* intrusion detection (pro_avmd2cam.tar.gz), congestion detection (pro_cdewwd.tar.gz)

Initialization of BOX setting information

Discard current setting and restore factory initial setting. The setting information to be initialized consists of the
following:
1. Parameter for the image recognition library
2. BOX IP address information
3. Authentication information for the camera user
Step 1
Select "3.BOX control" on the BOX configuration
page (+ page 17).
→ The BOX control window will be displayed. →
Step 2
Select "3.Reset BOX to default".
→ The confirming initialization window will be displa- →
yed.
Step 3
Click "Click here to execute".
→ The initialization success and reboot window will →
be displayed.
Step 4
Click the [reboot] button.
→ The BOX will be rebooted and the success win- →
dow will be displayed.
26