Major Operating Controls And Their Functions - Panasonic AF-FX100 Setup Instructions

Major operating controls and their functions

Front panel
① [POWER] indicator (green)
Lights when the power is on.
② [ALARM1] indicator (red)
Not used.
Rear panel
① [MODE]
If you forget the IP address of the BOX, the user-
name/password for the Web login, start up the
BOX assigned to "8". Return to "0" after ensuring
that initialization is completed.
Default:
IP address: 192.168.10.10
User name: admin
Password: panasonic
② [MAINTENANCE] lamp (top: red, bottom:
green)
Not used.
③ [MAINTENANCE] Maintenance port
Not used.
④ [LAN1] Network port 1
Not used.
⑤ [LAN2] Network port 2
Connects to the system network.
Default:
IP address: 192.168.10.10
③ [ALARM2] indicator (orange)
Lights when an IP address is duplicately detected
at BOX start-up.
④ [RESTART] button
Restarts this unit.
⑥ [SIGNAL GND] SIGNAL GND terminal
Connect this terminal to a SIGNAL GND terminal
of a device other than this unit in the system or
the frame ground for ground connection. Failure
to observe this may cause trouble such as oscilla-
tion and noise.
⑦ Cable clamp
Fastens the supplied AC adapter's power cable.
Cable clamp
⑧ DC input jack
Connects to 12 V DC power source. Be sure to
use the supplied AC adaptor.
8