Setting And Checking Of Box Using Parameter Setting Application; Application Start-Up - Panasonic AF-FX100 Setup Instructions

Setting and checking of BOX using parameter setting application

The procedure below explains how to set the BOX with use of the parameter setting application.

1. Application start-up

2. Application setup
3. Reading parameter
4. Editing parameter
5. Save parameter
6. Update parameter
Application start-up
Start-up
Execute "SettingParameter" on the desktop.
→ The start-up window will be displayed. →
Be sure to set the save folder*.
Specify the save folder on the "Browse For Folder" window.
* The save folder is a folder for parameter reading and saving.
E.g.) When the save folder is "C:\panasonic\box",
The save folder for the setting file of the BOX that is set to "192.168.10.10" is shown below.
"C:\panasonic\box\192168010010\box.tar.gz"
If the save folder is not specified, the parameter setting application is terminated. Therefore, be sure to specify
the save folder.
The save folder cannot be changed after start-up of the parameter setting application. If the save folder needs
to be changed, exit from the parameter setting application, make a restart, and make a resetting.
Caution:
• The parameter setting application can't be multi-started.
• When "boxip.csv" is included in the save folder, the file is read and displayed in the BOX IP List. Refer to
"<application installation folder>\default\boxip.csv" for the "boxip.csv" format.
31