LG 3828JD8984K User Manual page 15

Sxs refrigerator
Table of Contents

Advertisement

TV stations
II Memorizing
the Channels with Auto
For Auto program
to work, the programming
source
must be connected to the TV and the TV must be
receiving
programming
signals
either over-the-air
or
from a cable-type service provider.
Press the MENU button and then use • / •
button to select
the STATION menu.
Press the • button and then use •/•
button to select Auto
program.
Press the •
button and then use •
/ • button to select
Antenna,
Cable.
Press the OK button to begin the channel search.
• Wait for auto program to complete
the channel search
cycle before choosing a channel. The TV scans for
over-the-air channels and then channels provided by a
cable service.
F- [ Note ]
• When the channel search is complete, use the ,& / Y
buttons to review the memorized channels.
• If you press the MENU button in Auto program, the
function will stop and only channels programming up to
that time will remain.
• Auto program function can memorize only the channels
which are being received at that time.
• HDTV reception
will only display if the digital signal
transmitted
through
the cable
or satellite
service
provider is high definition.
Or ff the on air broadcast in your area is transmitted in
high definition and you have a high definition antenna
to receive the signal
The higher the signal strength, the less likely you are to
experience picture degradation.
15
m

Advertisement

Table of Contents
loading

Table of Contents