Table of Contents
Advertisement
7. Fine adjustment of vertical position
1. Loosen the screw on on the lower right side.
2. Turn the height adjusting screw to adjust the height.
• Repeat steps 1 to 7 to fine adjust the image to the screen.
See page 22 for details on adjustment range.
0-5. Retighten the six previously loosened securing screws.
Tightening torque: 0.98 N•m (10 kgf•cm)
HAS-K252
3. After completing adjustments, retighten the
loosened screw.
Tightening torque: 0.98 N•m (10 kgf•cm)
A
B
Supplied Allen
wrench (I)
17
Note:
Do not loosen these three
screws.
A
B
Advertisement
Table of Contents
