S Hort M Essages; L Ong M Essages; Gps R Eport - Kenwood NEXEDGE NX-200 Instruction Manual

2 Press the
• Message types are identified as follows:
I: Caller ID
S: Status Message
M: Short Message
• Press and hold the
display information as follows:
ID Name > Status/Short Message > CH/GID > Time Stamp
3 Press the
• To delete the selected message, press the
key. To confirm the deletion, press the
• To delete all messages, press and hold the
1 second. To confirm the deletion, press the
key.
S M
hort eSSageS
To send a short message, you must connect the transceiver to
a PC. Ask your dealer for details.
• Short messages can contain a maximum of 48 characters.
• Received short messages are displayed the same as Status
messages and are stored in the same stack memory. A combined
maximum of 15 Status calls and short messages can be stored in
the stack memory.
L M
ong eSSageS
To send and receive long messages, you must connect the
transceiver to a PC. Ask your dealer for details.
• Long messages can contain a maximum of 4096 characters.
gPS r
ePort
To send your location data, you must first connect a GPS unit
to the transceiver. GPS data can be manually transmitted
by pressing the key programmed as Send the GPS data, or
by accessing the Send the GPS data function through the
Menu {page 23}. If set up by your dealer, GPS data may be
automatically transmitted at a preset time interval.
/ keys to select the desired message.
key for 1 second to cycle the
key to return to normal operation.
key or #
key or key.
key for
key or
33