Dtmf (Dual Tone Multi Frequency) Calls; Aking A Dtmf C All - Kenwood NEXEDGE NX-200 Instruction Manual

DTMF (DUAL TONE MULTI FREQUENCY) CALLS

Note: DTMF calls can be made only in analog operation.
m dtmF c
Aking A
■ Manual Dialing (Keypad Models Only)
1 Press and hold the PTT switch.
2 Enter the desired digits using the DTMF keypad.
• The corresponding DTMF tones sound each time you
press a key.
• If you release the PTT switch, transmit mode will end even
if the complete number has not been sent.
■ Keypad Auto PTT (Keypad Models Only)
If your dealer has activated the Keypad Auto PTT function,
simply press the keys on the keypad to make the call.
• The DTMF code will be sent automatically when you press a
key.
■ Store & Send
1 Press the key programmed as Autodial.
2 Enter the desired digits using the DTMF keypad.
• The digits appear on the display as you enter them.
• Alternatively, you can enter digits by using the
keys {page 26}.
• You can enter up to 30 digits before transmitting.
3 After entering the complete number, press the PTT
switch to transmit.
Note: If you switch the power OFF before transmitting the
number, the number will be cleared.
34
All
/