Adio A Ccess N Umber (Ran); O Ptional S Ignaling; Ibrator - Kenwood NEXEDGE NX-200 Instruction Manual

r A
Adio cceSS
RAN is a new signaling system designed only for digital radio
communications. The operation is the same as the analog
QT/ DQT signaling.
When a channel is set up with a RAN, squelch will only open
when a call containing a matching RAN is received. Likewise,
signals that you transmit will only be heard by parties whose
RAN signaling matches your transceiver.
If a call containing a different RAN is made on the same
channel you are using, squelch will not open and you will not
hear the call. This allows you to ignore (not hear) these calls.
o S
ptionAl ignAling
Your dealer may also program several types of option signaling
for your transceiver channels.
2-tone Signaling: 2-tone Signaling opens the squelch only when
your transceiver receives a call containing matching 2 tones.
DTMF Signaling: DTMF Signaling opens the squelch
only when the transceiver receives a call containing a
matching DTMF code. Refer to "DTMF (DUAL TONE MULTI
FREQUENCY) CALLS" on page 34.
FleetSync Signaling: Refer to "S
on page 30.
NXDN ID Signaling: NXDN ID is an optional signaling system
available only for digital communications.
v

iBrAtor

When an optional external vibrator is installed, the vibrator
function will alert you when an optional signaling call is
received.
Press the key programmed as Vibrator, or access the Vibrator
function through the Menu {page 23}, to turn the Vibrator
function ON and OFF.
• When activated, the
40
n (rAn)
umBer
icon appears on the display.
(S
ELCALL ELECTIvE
C )"
ALLINg