Sharp PW-TC980 Quick Reference Manual

QUICK REFERENCE
Layout
Charge lamp
Selection keys for contents/functions
Global search keys
Antenna (side)
Power ON/OFF key
Function key
Earphone jack (side)
Page scroll keys
Volume control keys (volume up/down)
Speaker
Audio key
S-jump key
Example/explanation key
Character size change keys
PRINTED IN CHINA
Using the PW-TC980 for the fi rst time
First, insert the rechargeable batteries, and ensure that they are charged before use.
1
Remove the battery cover on the
reverse side of the unit.
To remove the battery cover, slide it in the
direction indicated by the arrow while
pressing the symbol on the battery
cover, and then pull it up in the direction
indicated by the arrow .
2
Insert the supplied rechargeable
battery (EA-BL14).
Insert the rechargeable battery into the battery
housing at an angle, and then slightly press
the terminal end of the battery and completely
press down the opposite side.
• Do not touch the terminals of the rechargeable battery or the unit.
• Do not insert the rechargeable battery reversely. Confi rm orientation. Do
not force the battery. This can cause problems such as breakage.
3
Replace the battery cover.
4
Connect the (EA-80A) AC adapter in the order of
When the charge lamp will light red, the charging has started.
Charge lamp
Power outlet
(AC)
AC adapter connector
ELECTRONIC DICTIONARY
Display (Main display) / touch pad
Card slot (Front)
08LSP(TINSE1466EHZZ) 0GS9702620////
5
When charging is complete, the charge lamp will turn off.
• A complete charge will normally take approximately 5.5 hours (the
charging time can change depending on operating temperature and
conditions).
6
Remove the AC adapter from the connector and the outlet.
7
Open the unit and press
to turn on the
power.
After a while, the calibration screen
for the touch pad appears on the
display (main display).
8
Pull out the stylus and use it to accurately touch each center
of the four "+" characters displayed on the touch pad on
the display (main display). Then do the same to the four "+"
characters displayed on the handwriting pad.
Back of
Stylus
the unit
Pull out the
stylus to use.
and then .
• When calibration is fi nished the LCD contrast adjustment screen is displayed.
9
Adjust the LCD contrast of the handwriting pad by touching
or on the pad.
10
After these adjustments, press
The key sound (beep) on/off screen appears.
11
Press or to turn the key sound on/off.
The kana entry screen appears.
12
Press to select alphabet character input or press
select Japanese input.
PW-TC980
The date/time settings screen is displayed.
13
Select the date items using
(year), " " (month) and " " (day) (e.g. June 8th, 2009
06 08) using the number buttons on the handwriting pad.
Utility keys for
Confi rm that the cursor is on "AM
dictionaries/functions
and then select one of them using
Library key
Press , select the time items using
Menu key
enter " " (hour) and " " (minute) (e.g. 3:25
14
Stylus holder (side)
Confi rm that the information entered is correct and press
.
Dictionary/TV switch keys
The menu display appears.
AC adapter connector (side)
Viewing 1Seg TV contents
Clear key
Back space key First, set channels for which there is reception (channel selection list
settings).
USB connector (side)
Example: Setting up channels in "
Cursor keys
(Kansai area/Osaka pref./Osaka).
1
Speaker
Extend the antenna.
Search/enter key
F u l l y e x t e n d t h e
antenna. If the antenna
Escape key
is not fully extended,
Handwriting pad
it may not stand up
straight because it is
not locked in position.
Using 1Seg TV
1
Fully extend the antenna.
2
Press
The TV content is displayed.
Use the numeric keys (
channel.
To adjust the volume, use
Perform channel selection list settings on the dictionary screen.
1
Fully extend the antenna.
2
Press
The TV content is displayed.
3
Press
The TV settings menu is displayed.
4
Select "channel selection
list settings" and press
(or touch the
menu item to select it).
The channel selection settings list appears.
5
Select the settings and edit menu items from the on the right
.
side of the screen to adjust the settings (For details, refer to
the Instruction Manual).
2
to
Press
Channel setting confi rmation
window is displayed.
3
or , and then enter " " Press
09
4
Press the numeric key
to select the area.
" or "PM ",
5
Then, press
or .
the prefecture.
or and then
6
Finally, select the region by
03 25).
pressing
Channel select list set-up
confi rmation window is displayed.
7
Press
starts.
8
When done, channel
selection list is displayed,
/ / " and the region name "
is registered.
9
Select a channel by using the numeric keys (
by touching the channel name.
The selected TV program is displayed.
Channels can also be selected by using
Using the channel selection list
1
While in the TV viewing
mode, press
.
The channel selection list appears.
2
to ), or and to select a Use
an area.
and/or .
3
Select a channel by using the numeric keys (
by touching the channel name.
The selected TV program is displayed.
.
Adjusting the display size
1
While in the TV viewing
.
mode, press
2
Select "
press
touch the menu item to
select it)
Touching the screen in the TV viewing mode will also switch the display size.
3
Use
The window confi guration screen appears.
.
.
to select
.
. Channel selection
"
to ), or
or and pressing
.
and to select
to ), or
.
" and
(or
and to select the display size and press
(or touch the menu item to select it).