Starting Setup; Changing The On-Screen Display Language - Toshiba 42HP66 Owner's Manual

÷
÷
Starting setup
The STARTING SETUP feature appears the first time you turn on the
TV, and helps you select the menu language, specify the TV/CABLE
setting, and program channels automatically.
IMPORTANT: Make sure that the antenna or cableTV system is
connected.
1. Press TV to select the TV mode.
2. Press POWER to turn on the TV. The STARTING SETUP function
begins and the language setup menu appears on the screen.
Press • or • to select your desired
language, then press ENTER.
3. Press • or • to select TV or .......................
CABLE, then press ENTER.
FRAN£Ai8
ESp_NO£
4. Press • or • to select START, and ,.= .................
then press ENTER, which
starts the AUTO SETUP.
Note:
To cancel the setup and return to the regular TV screen, press •
or • to select CANCEL and press ENTER.
5. When the AUTO SETUP is complete, the regular TV screen
appears.
Notes:
• AUTO SETUP of channels may take 15-30 minutes to complete,
depending on your regional cable service.
• To cancel the AUTO SETUP and return to the regular TV screen,
press EXIT.
After you have installed the batteries and programmed the remote
control, you need to set some preferences on the TV using the menu
system.You can access the menu system with the buttons on the
remote control.
• When you make a menu selection, your changes are immediate.
You do not have to press MENU or EXIT to save your changes.
• After one minute, the menu screen will automatically close if you do
not make a selection.Your changes will still be saved.
• When you are finished programming the menus, press EXIT.
Changing the on-screen display language
You can choose from three different languages (English, French and
Spanish) for the on screen displays. Adjustment menus and messages
will appear in the language of your choice.
To select a language:
1. Press TV to select the TV mode.
2. Press MENU, then press 4 or _" until the SETUP menu appears.
SETUP
LANGUAGE ENGLISH
CLOCK SET
TV J CABLE OABLE
CH PROGRAM
ADO / Er_,_SE
,_,,SELECT ,_,,A D,_UST
3. Press • or • to highlight LANGUAGE.
TV/CABLE CABLE
CH _ROG_AM
ADD/E_ASE
'F*':SEL EC _" '_:ADJUST
4. Press _ or _, to highlight your desired language.
23
POWER
TV
Menu/Enter
AV4_
Exit
Note:
The position and size of the on-screen menus
change for some program formats (such as
1080i or 720p.)
Note:
If the remote control does not operate your TV,
press the "TV" button on the remote control
and try again.
÷
3X70121A En p18=25 23 _ 1/31/06,10:58 PM