Labeling Channels - Toshiba 42HP66 Owner's Manual

÷
÷
Labeling channels
Channel labels appear above the on-screen channel number display
each time you turn on the TV, select a channel, or press the DISPLAY
button. You can choose any four characters to create a channel label.
To create channel labels:
1. PressTV to select the TV mode.
2. Select a channel you want to label.
3. Press MENU, then press 4 or _ until
the OPTION menu appears.
4. Press • or • to highlight CH LABEL.
5. Press _" to display the CH LABEL
menu. SET/CLEAR will be high-
lighted.
6. Press 4 or _" to highlight SET.
7. Press ENTER to highlight LABEL.
8. Repeatedly press _t or !_ until the
character you want appears. Press
ENTER.
OPTION
ON TI_ER OFF
FAVOmTE ¢H
WDEO L_E_
,_,SELECT ,_,,ADJUST
ON,ABEL ,CH 2
LABEL
....
nETURN
_:SELECT @,ADJUST
ENTE_SET
Note:
The character will change as follows.
- _ 0"-'9 _ A'*-Z
SPACE _ + _ -
9. Repeat step 8 to enter the rest of the
characters.
If you would like a blank space in the label name, you must
choose an empty space from the list of characters; otherwise, a
dash will appear in that space.
10. Repeat steps 1-9 for other channels.You can assign a label to
each channel.
11. Press EXIT to return to normal viewing.
ON,ABEL ,CH 2
SET
_,,_ELECT _,ADJU_T
ENT_,SET
To erase channel labels:
1. Press TV to select the TV mode.
2. Tune the TV to the channel whose label you want to erase.
3. Press MENU, then press _ or _* until the OPTION menu appears.
4. Press • or • to highlight CH LABEL.
5. Press _ to display the CH LABEL menu. SET/CLEAR will be
highlighted.
6. Press _1or @ to highlight CLEAR.
7. Press ENTER.
8. Repeat steps 1-7 to erase other channel labels.
-- Channel
Numbers
m TV
-- Menu/Enter
-- Exit
÷
Note:
If the remote control does not operate your TV,
press the "TV" button on the remote control
and try again.
3O
3X70121A En p26-31 30 _ 1/31/06,10:59 PM