Adding Channels To The Tv's Memory; Programming Channels Automatically; Adding And Erasing Channels Manually; Changing Channels - Toshiba 42HP66 Owner's Manual

÷
÷
Adding channels to the TV's memory
When you press CH ^ or v, your TV will stop only on the channels
you have programmed into the TV's channel memory. Follow the steps
below to program channels into the channel memory.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase channels manually.
To add channels automatically:
1. Press TV to select the TV mode.
2. Press MENU, then press 41or _ to display the SETUP menu.
3. Press • or • until the TV/CABLE
selection is highlighted.
4. Press 41 or I_ to highlight either .....
LANGUAGE ENGLISH
TV or CABLE, depending on
which you use ..........
If you use an antenna, choose TV.
If you use cable, choose CABLE. ,., . ........ _, ........
5. Press • until the CH PROGRAM selection is highlighted.
6. Press _- to start channel programming. The TV will automatically
cycle through all the TV or Cable channels (depending on which you
selected), and store all active channels in the channel memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW PLEASE WAIT" appears.
7. When channel programming is complete, the message "COMPLETED"
appears.
8. Press CH ^ or v to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add or
erase specific channels manually.
To add or erase channels manually:
1. Press TV to select the TV mode.
2. Press MENU, then press _ or _,-to display the SETUP menu.
3. Press • or • to highlight ADD/
ERASE.
4. Press _ to display the ADD/ERASE
SETUP
menu. c,,._,,,oE E.ous,
5. Select the desired channel to be .........
TV / Ct, eLE TV
CH PROGRAM
memorized or deleted using • or
• . Press _1or _ to select either
,_,:SELECT I_,:AOJUST
ADD or ERASE.
6. Repeat step 5 for other channels you want to add or erase, then
press ENTER.
7. Press EXIT to return to the normal screen.
To erase all channels from the channel memory:
Press • or • to select CLEAR ALL in step 4 above, then press b,'.
All channels are erased from the channel memory. (You can still use the
Channel Numbers on the remote control to tune a channel.)
Changing channels
To change to the next programmed channel:
Press Channel • / • on the TV or CH A/V on the remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9) on the remote control.
For example, to select channel 125, press 1,2, 5.
To change to a specific digital channel:
Press the first 3 digits, then press 100, followed by the remaining 3
digits. For example, to select channel 015-001, press 0, 1,5, 100, 0,
0,1.
24
Channel
Numbers
TV
Channel A/V
Menu/Enter
Av4_
Exit
In addition to cycling through your pro-
grammed channels, the Channel A or v
buttons will also cycle through the video
input sources (page 31) in the order
illustrated below.
ANT (programmed channel) _ VIDEO1 _ VIDEO2
PC VIDEO3
HDMI2 _ HDMI1 _ ColorStream HD2 _ ColorStream HD1
Note:
Digital cable channels may be represented by
channel numbers that include a "dash" (e.g.,
85-002.) These digital channel numbers may
not match the numbers in the channel line-up
provided by your cable company This is not a
malfunction.
Note:
If the remote control does not operate your TV,
press the "TV" button on the remote control
and try again.
÷
3X70121A En p18-25 24 _ 1/31/06,10:58 PM