Table of Contents
Advertisement
Table 7-2
Possible operations and displays in the toolbar of the Configuration Tool
Field / button
Confirm all events
Ignore event
7.2.1
Connect / disconnect online connection
How to establish an online connection to the SICLOCK TC100:
1. Enter the IP address of the device in the toolbar.:
2. Start establishing the connection by clicking the icon
address field.
The Configuration Tool changes into online mode:
How to terminate the online connection to the SICLOCK TC100:
1. Click
The Configuration Tool changes into offline mode:
Note
The connection to the device is terminated after about two hours without operator
input.
Siemens AG 2010 All Rights Reserved
®
SICLOCK
TC100 Operating Instructions
Acknowledges all pending events
In online mode, an acknowledgment for all pending events is sent to the
device. An acknowledgment is made, even if the cause of the event is still
pending. This enables, e.g., persistent alarms to be deactivated.
Rejects the pending event
The event display is deleted without interaction with the device.
next to the IP address field.
Meaning / instruction
Configuration Tool
next to the IP
7-4
Advertisement
Table of Contents
