Network Settings On The Device - Siemens SICLOCK TC100 Operating Instructions Manual

Parameter assignment and operation of the device
8.2.2

Network settings on the device

One-button operation can be used to read out the network settings of the device,
and settings can be made to the extent required for commissioning.
The following can be set and/or readout:
IP address, selection from the list offered
Subnet mask, selection from list offered
Gateway, read only.
The following diagram shows the setting options:
.
11:46:48
Mo, 4. Oct. 2010
45s
Level 1:
IP adress
192.168.001.010
45s
Level 2: ->Selection -->Reset
192.168.001.010 ?
Accept value
Figure 8-9 Assigning network settings
On level 2, one of the predefined selection values can be selected for the network
setting.
For IP addresses:
192.168.001.010
192.168.001.011
192.168.002.020
192.168.002.021
For subnet masks:
255.255.255.000
255.255.254.000
8-7
->GPS1
short
short
-> IP subnet
--> 255.255.255.000
long
short
->Selection -->Reset
192.168.001.011 ?
long
short
-> IP Gateway
--> 000.000.000.000
short
...
Siemens AG 2010 All Rights Reserved
®
SICLOCK TC100 Operating Instructions
->