Redundant Point-To-Point Connections - Siemens SICLOCK TC 400 Operating Instructions Manual

6.4.2

Redundant point-to-point connections

OUTPUT 1 and OUTPUT 2 of the devices are decoupled internally so that one
output of each device can be connected in parallel to the same time receiver.
Figure 6-8 Example with redundant time reception at OUTPUT 1
Further information
Redundancy (Section 2.6)
OUTPUT 1 and 2 redundant (Section 9.2.4)
© Siemens AG 2007 All Rights Reserved
®
SICLOCK TC 400
Connecting
6-43