Menus - Siemens SICLOCK TC 400 Operating Instructions Manual

Configuration Tool
7.1

Menus

Table 7-1 Menus in the configuration tool
Menu/Function
File
Open
Save
Exit
Connection
Connect
Disconnect
Data transfer
(online connection required)
Download parameters
from device
Refresh parameters
from device
Upload parameters to
device
Download archive
Refresh archive
View
Parameters
Archive/Events
Language
7-48
Load a parameterization/archive from the local file system
See also General functions (Section 7.2).
Save of a parameterization/archive to the local file system
See also General functions (Section 7.2).
Exit the application
See also Establish/disconnect online connection (Section 7.2.1).
Connect to a device
Disconnect from a device
See also Establish/disconnect online connection (Section 7.2.1).
Download all parameters from a connected device to the PC
See also Parameters (Section 7.3).
Refresh all parameters previously loaded to the PC with the values of
the connected device
See also Parameters (Section 7.3).
Write all parameters from the PC to the connected device
See also Parameters (Section 7.3).
Download the entire archive from the connected device to the PC
See also Archive (Section 7.4).
Re-request/refresh the archive of a connected device
See also Archive (Section 7.4).
Change to the Parameters view
See also Parameters (Section 7.3).
Change to the Archive/Events view
See also Archive (Section 7.4).
Selection of the languages available for the user interface
Depending on the version, several languages may be offered for selec-
tion
• English (standard language)
• German
The language/naming of the parameters and archives is supplied by the
device. If the language set in the configuration tool is known to the
device, then the parameter/archive is displayed in this language. If the
language is not known to the device, the display is in the standard lan-
guage.
Meaning/Note
© Siemens AG 2007 All Rights Reserved
®
SICLOCK TC 400