Setting The Clock - Sharp QT-V5E Operation Manual

Setting the clock

QT-V5E
The clock can only be set using the buttons on the remote control.
In this example, the clock is set for the 12-hour (AM 12:00) display.
1
Press the ON/STAND-BY switch on the main unit to turn the power
on.
2
Press the CLOCK button.
3
Within 5 seconds, press the
lect the hour.
14
button to se-
4
Within 5 seconds, press the or
to adjust the hour.
Press the or button once to advance the time by
1 hour. Hold it down to advance continuously.
5
Within 5 seconds, press the button to se-
lect the minute.
6
Within 5 seconds, press the or
to adjust the minute.
Press the or button once to advance the time by 1 minute. Hold it down to
advance continuously.
7
Within 5 seconds, press the ENTER button.
To confirm the time display:
Press the CLOCK button for less than 0.5 seconds whilst the main unit turns the
power on.
The time display will appear for about 5 seconds.
To readjust the clock:
Perform "Setting the clock" from step 1.
To change the 12-hour or 24-hour display:
When the time is displayed, press the DISPLAY button for 0.5 seconds or more to se-
lect the 12-hour or 24-hour display.
"AM 12:00" The 12-hour display will appear.
(AM 12:00 - PM 11:59)
"0:00" The 24-hour display will appear.
(0:00 - 23:59)
Note:
Insert memory batteries to keep the clock setting even after unplugging the unit.
QT-V5E_UK_2.fm
04/6/8
button
button
9HX80432100003