Dvd Playback; Playback - Sharp QT-V5E Operation Manual

DVD playback

QT-V5E
Turn on the TV, and switch the input to the "VIDEO 1", "VIDEO 2", etc.
accordingly.
16

" Playback

1
Press the ON/STAND-BY switch on the
main unit to turn the power on.
! The startup screen appears.
! When the disc input mode is not selected, press
the STOP button to display the startup screen.
! If the startup screen does not appear, make sure
the correct video input is selected on the TV .
! If the initial setting screen is blurred, press the NTSC/PAL button repeatedly
whilst holding down the SHIFT button to change the TV type (see page 23).
2
Press the OPEN/CLOSE button to open the disc tray.
3
Place the disc on the disc tray, label side up.
Be sure to place 8 cm discs in the middle of the tray.
4
Press the OPEN/CLOSE button to close the disc tray.
Discs supporting auto start will start to play once you close the disc tray even if
you do not press the PLAY/PAUSE / button.
5
If playback does not start, press the PLAY/PAUSE / button.
QT-V5E_UK_3.fm
04/6/8
NO DISC
DVD
VideoCD
CD
Audio Visual
Entertainment
Label side
Disc tray
9HX80432100003