Section 3. System Programming; Dtmf Sending Pause Time; Call Forwarding By Isdn Service; [614]-[615] Doorphone Call Forwarding - Day/Night - Panasonic KX-T7400 Series User Manual Addendum

3. System Programming
[205]

DTMF Sending PAUSE Time

Assigns the starting time for sending out the DTMF signalling to the ISDN Network.
2
X – X + 0.5 sec.
D
EFAULT
C
HANGE
[517]

Call Forwarding by ISDN Service

Enables or disables the Call Forwarding by ISDN Service function on a Class of Service
(COS) basis.
5
X – Selection number: 1 (Enable) / 2 (Disable)
D
EFAULT
C
HANGE
[614]–[615] Doorphone Call Forwarding – Day/Night
Assigns the destination phone number to the system for forwarding an incoming doorphone call.
6
X – Program address selection number: 4 ([614] for day) / 5 ([615] for night)
!
• Enter "
!
• To delete the current entry, press # after entering the programming address.
D
EFAULT
C
HANGE
42
0 5 X
(1···6)
1.5 seconds (1 + 0.5 sec.)
seconds
1 7
COS no.
(1···4,
All COS – Disable
The Programming Table is on page 61.
1
X
ISDN port access code (9, 81, 82) + destination phone no.
(4, 5)
" for a PAUSE. The PAUSE is counted as two digits.
Not stored.
ISDN port access code + destination phone no.
for day
for night
[205][517][614]–[615]
#
X #
(1···2)
)
(20 digits max. 0···9, )
#