Panasonic KX-T7400 Series User Manual Addendum page 51

3. System Programming
The whole programming content has been changed except the programming address.
[404] CLIP/COLP Number Assignment
Assigns the Calling Line Identification Presentation (CLIP) and Connected Line
Identification Presentation (COLP) numbers. You can classify both CLIP and COLP
numbers into the business and private modes.
4
* Extension number: 21 through 28, 31 through 34 (standard extension) /
X – CLIP/COLP Classification
!
! • To delete the entry, press # after CLIP/COLP Classification.
D
EFAULT
C
HANGE
The programming method and conditions have been changed.
[412] ISDN DDI Number/Extension Number Transformation
Used to convert a DDI number to an extension number in order to put an incoming DDI call
to a specific extension.
4
* Extension number: 21 through 28 / 31 through 34
! • Please see [903] for your reference.
!
• To delete the entry, # after entering the extension number.
D
EFAULT
C
HANGE
0 4 ISDN port no.
(1···2,
301 through 308 (ISDN extension) /
300 (all ISDN extensions)
All CLIP/COLP numbers – Not stored.
The Programming Table is on page 57.
ISDN port no.
1 2
(1···2,
/ 291 through 298 (UCD Group or Ring Group)
/ 301 through 308 (ISDN extension) / 300 (all ISDN extensions)
All DDI numbers – Not stored.
The Programming Table is on page 58.
extension no.*
)
1 : CLIP no. – Business
2 : CLIP no. – Private
3 : COLP no. – Business
4 : COLP no. – Private
: All
extension no.*
)
[404][412]
X CLIP/COLP no.
20 digits max. (0···9)
(1···4, )
DDI no.
20 digits max. (0···9)
#
#
51