Table of Contents
Advertisement
Parts and their functions
Front panel
VTR
ENABLE
MONITOR
CHROMA
ON
CABLE LENGTH
100m
50m
OFF
SET UP
Y/VIDEO
CHROMA
(PUSH)
PR
INTERCOM
MIC
ON
OFF
PB
RCU
CAMERA
KNEE POINT
PGM
PUSH
POWER
KNEE SLOPE
OFF
ON
BBS
CALL button
While this button is held down, the tally lamps of the
camera recorder are made to light.
TALLY (red) lamp
This indicates the red tally signal which is input to
the TALLY connector.
TALLY (green) lamp
This indicates the green tally signal which is input to
the TALLY connector.
WHITE BAL switch
This is used to select the white balance memory.
PRST:
At this setting, the white balance is set to the
preset value (3200K).
Use it when there is not enough time to adjust
the white balance.
O The preset value can be set on the camera
recorder's menu to any color temperature.
A or B:
At this setting, the adjusted white balance value
is stored in the memory at the A or B position.
AWB button
This is used to adjust the white balance
automatically.
It does not work when the WHITE BAL switch
set at the PRST position.
When lighted:
The white balance is now being adjusted.
When off:
The adjustment of the white balance is
completed.
Flashing 5 off:
The white balance adjustment has failed.
( )
( )
REW
FF
STOP PLAY
REC CHK
START/STOP
CALL
TALLY
VTR WARNING
SHUTTER
GAIN
AWB
BAR
WHITE
BAL
ABB
AUTO KNEE
A
B
POS2
POS3
PRST
POS1
POS4
SV
POS5
PAINTING
SS
POS6
GAIN
DETAIL
ENABLE
R
B
BLACK
GAMMA
AUTO IRIS
IRIS
GAIN FILTER
M.PED
CHECK
BAR button
This is used to switch the images which are output
to color bar signals.
When lighted:
The color bar signals of the camera recorder are
output.
When off:
The images being shot by the camera recorder
are output.
ABB button
This is used to adjust the black balance
automatically.
When lighted:
The black balance is now being adjusted.
When off:
The adjustment of the black balance is
completed.
Flashing 5 off:
The black balance adjustment has failed.
AUTO KNEE button
This is used to set the AUTO KNEE function to ON
or OFF.
When lighted:
The AUTO KNEE function is ON.
When off:
The AUTO KNEE function is OFF.
GAIN button
This is used to select the gain value of the video
amplifier.
The gain value is increased.
3:
The gain value is reduced.
4:
SET UP button
This displays the menus of the camera recorder.
When it is lighted, the menus are displayed on the
screen which is connected to the MONITOR
connector.
SET UP dial
This is used to perform the menu settings.
Turn the dial to select a menu, and press it to enter
the setting.
is
Menu settings can be performed when the SET UP
button
is lighted.
If, while the SET UP button is off, the shutter speed
selector dial
SHUTTER button
SCAN shutter speed can be set.
When the SET UP dial is now turned while keeping
it pushed in, the SYNCHRO SCAN shutter speed
can be changed continuously.
is set to the
position, and the
SS
is lighted, the SYNCHRO
7
Advertisement
Table of Contents
