Table of Contents
Advertisement
Parts and their functions
Front panel
VTR
ENABLE
ON
MONITOR
CHROMA
CABLE LENGTH
100m
50m
OFF
SET UP
Y/VIDEO
CHROMA
(PUSH)
PR
INTERCOM
MIC
ON
OFF
PB
RCU
CAMERA
KNEE POINT
PGM
PUSH
POWER
KNEE SLOPE
OFF
ON
BBS
SHUTTER button
This enables the operation of the shutter speed
selector dial
.
When using an electronic shutter, press this button
to light it.
Shutter speed selector dial
This is used to select the shutter speed.
(SYNCHRO SCAN), SV (SUPER V) or POS
SS
(POSITION) 1 to 6 can be selected as the speed.
When the SHUTTER button
speed will not change even when this dial is turned.
<Note>
The shutter speed for SV (SUPER V) or POS
(POSITION) 1 to 6 can be set on the SHUTTER
SELECT screen of the OPERATION page.
PAINTING ENABLE button
This enables color compensation (GAIN dial
BLACK dial
).
When lighted:
Color compensation can be performed.
When off:
Color compensation cannot be performed.
GAIN dial
This is used to adjust the red (R) and blue (B) gain.
BLACK dial
This is used to adjust the red (R) and blue (B)
pedestal (black level).
8
REW
FF
STOP PLAY
REC CHK
START/STOP
CALL
TALLY
VTR WARNING
SHUTTER
GAIN
AWB
BAR
WHITE
BAL
ABB
AUTO KNEE
A
B
POS2
POS3
PRST
POS1
POS4
SV
POS5
PAINTING
SS
POS6
GAIN
DETAIL
ENABLE
R
B
BLACK
GAMMA
AUTO IRIS
IRIS
GAIN FILTER
M.PED
CHECK
is off, the shutter
and
AUTO IRIS button
This is used to set the auto iris function to ON or
OFF.
When lighted:
The auto iris function is ON.
When off:
The
auto
iris
function
adjustment).
IRIS dial
When the AUTO IRIS button
or subtracts the value produced by turning the dial
to or from the A.IRIS LEVEL value of the user
menu.
When the AUTO IRIS button
adjustment is performed manually.
<Note>
Set the IRIS switch on the lens to the AUTO
position.
F-number display panel
The f-number of the lens is normally displayed
here.
When the gain or filter is changed, the respective
value is displayed here for about two seconds.
Each time the CHECK button
display changes by one step in the following
sequence: f-number 5 gain value 5 filter No. 5 f-
number.
<Note>
[– – –] appears when the power of the camera
recorder is off.
GAIN lamp
This lights when the gain value is displayed on the
f-number display panel
FILTER lamp
This lights when the filter number is displayed on
the f-number display panel
CHECK button
Each time this button is pressed, the display on the
f-number display panel
the following sequence: f-number 5 gain value 5
filter No. 5 f-number.
lamp
This lights when the lens extenders (k2) are used.
is
OFF
(manual
is lighted, this adds
is off, the iris
is pressed, the
.
.
changes by one step in
Advertisement
Table of Contents
