Panasonic DP-2000 Operating Instructions Manual page 57

Customizing Your Machine
No. Parameter
088 LINE SELECTION
[See Note 4]
089 LIST OUTPUT TRAY
095 DUPLEX PRINT
097 SPECIAL TRAY
No.1 - 3
099 MEMORY SIZE
(Flash Memory)
140 LAN RELAY XMT
REQUEST
141 LAN XMT REDUCTION
142 RELAY XMT
(a.k.a. LAN RELAY
STATION on UF-770i)
143 RELAY XMT REPORT
144 EMAIL CHARACTER
SET
145 SENDER SELECTION
146 POP TIMER
147 AUTO POP RCV
(See Note 3)
Continued on the next page...
Setting
Setting
Number
*1 Auto Setting the home position for the Telephone Line selection.
Auto :Selects the available telephone line for transmission
2 Line-1
Line-1:Selects this as the default telephone line, unless manually
Line-2:Selects this as the default telephone line, unless manually
3 Line-2
*1 Inner 1 Selecting the Output Tray home position for List printout.
Inner 1 : The List printout exits to the Bottom Output Tray.
2 Inner 2
Inner 2 : The List printout exits to the Upper Output Tray (Blue).
3 Outer
*1 Invalid Selecting whether the machine performs duplex print.
2 Valid
*1 None Select up to 3 Special Trays that will not be used for printing
received faxes (4-Tray configuration). One Tray must always be
2 Tray 1
available for receiving Faxes.
(You can specify one Tray (1 ~ 4) for each selection No. 1, No. 2
3 Tray 2
and/or No. 3)
4 Tray 3
5 Tray 4
- - Displays the amount of base and optional memory installed.
(Base Memory + Optional Memory)
*1 Invalid Selecting whether the machine performs LAN Relay XMT
Request.
2 Valid
Selecting whether to automatically reduce from LEDGER / B4 to
*1 Invalid
A4, when LEDGER / B4 documents are transmitted via LAN.
Invalid : No reduction
2 Valid
Valid : Automatic reduction from LEDGER / B4 to A4
1 Invalid Selecting whether the machine accepts and performs G3 relayed
transmission. (Relay Station Functions)
*2 Valid
Setting how the COMM. Journal for relayed transmission is sent to
1 Off
the originator.
Off
*2 Always
Always : Always send.
Inc.Only: Send only if communication has failed.
3 Inc. Only
1 Japanese Selecting the Character Set when receiving or sending email text.
*2 English
*1 Invalid Selecting a pre-programmed sender's name and email address
before each transmission.
2 Valid
-- 0 to 60 min. Setting the time interval for the machine to check for email on the
POP Server.
3 *3 min.
(0 = Does not check the POP Server for email. )
1 Invalid Selecting whether the machine automatically downloads an email
from the POP Server.
*2 Valid
PROGRAMMING YOUR MACHINE
Comments
automatically.
selecting an alternate phone line.
selecting an alternate phone line.
: Don't send.
57