Panasonic DP-2000 Operating Instructions Manual page 73

Receiving Documents via LAN
5
Dial by any combination of the following methods:
• One-Touch Dialing
• Abbreviated Dialing
• Directory Search Dialing, press
email address is entered.
• Manual Number Dialing, press
station is entered (up to 70 addresses).
Ex:
6
The document(s) is stored into memory with a file number.
The machine then connects to the LAN and transmits the Ledger
size document(s).
(After the document(s) are sent, the "LEDGER EMAIL XMT"
Select Mode will automatically return to the preset position (ON)).
To send with reduction, follow the steps below.
Repeat steps 1 to 6, except in step 4, set the "LEDGER EMAIL XMT" setting to "OFF" position.
When the Select Mode "LEDGER EMAIL XMT" setting is set to the "OFF" position, the transmission reduction
is according to the setting of Fax Parameter No. 141 (LAN XMT REDUCTION). (See the Table below)
(see Note 1)
LEDGER EMAIL XMT = ON : Transmits actual document size (without reduction).
LEDGER EMAIL XMT = OFF : Reduces LEDGER size document to B4 size or to A4/Letter before
Document Size
LEDGER
B4
A4/Letter
NOTE
1. Factory default setting for Fax Parameter No. 141 (LAN XMT REDUCTION) is "Invalid".
SET
SET
transmission. (According to the Fax Parameter No. 141 (LAN XMT
REDUCTION) setting, see Table below)
LEDGER EMAIL XMT = ON
LEDGER
B4
A4/Letter
BASIC OPERATIONS
<01> (Station name)
panasonic.usa@panas
after each
after each
Document Size Transmission
LEDGER EMAIL XMT = OFF
Fax Parameter No. 141
(LAN XMT REDUCTION)
set to "Invalid"
B4
B4
A4/Letter
Fax Parameter No. 141
(LAN XMT REDUCTION)
set to "Valid"
A4/Letter
A4/Letter
A4/Letter
73