Manual Number Dialing - Panasonic DP-2000 Operating Instructions Manual

Sending Documents

Manual Number Dialing

To dial the telephone number manually, follow the steps below.
Make sure that the FAX lamp is ON. If not, press
1
a
Place original(s) face up on the ADF.
1
b
Place a book or an original face down on the Platen
Glass.
2
Make sure that the MEMORY lamp is on.
If not, press
3
Enter a telephone number from the keypad.
Ex:
5 5 5 1 2 3 4
• If your
Communication Port Kit installed, the machine will
automatically select the available telephone line for
transmission (indicated by "AUTO" on the LCD display).
• If you wish, you can change which telephone line the
machine should use by selecting Line-1 or Line-2 with the
LINE SELECT
Continued on the next page...
or
MEM XMT to set "On".
machine does have
key on the Control Panel.
BASIC OPERATIONS
(see Note 1) (see Note 2) (see Note 3) (see Note 4)
to select the "FAX MODE".
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
5551234
the 2nd G3 Fax
Note4
(AUTO)
41