Access Code; Setting The Access Code - Panasonic DP-2000 Operating Instructions Manual

Access Code

The Access Code prevents an unauthorized user from operating the machine. Once a 4-digit Access Code is
registered, no one can operate the machine without entering the correct access code.
Automatic Receiving, however, is always available. After you complete any operation, such as mode setting or
transmission, and the display returns to standby, you have to re-enter the access code in order to use the machine
again. Registering the Access Code does not affect the use of the machine in any other way.

Setting the Access Code

1
2
3
4
Enter a 4-digit Access Code.
Ex:
1 2 3 4
5
6
Select Restriction Level.
for All operations
or
for Setting and Printing the Fax Parameters only.
Ex:
2
7
(see Note 1)
NOTE
1. To erase the Access Code, enter the Access Code and press
3, then press CLEAR SET and STOP
ADVANCED FEATURES
SET MODE
ENTER NO. OR
FAX PARAMETER(1-99)
38 ACCESS CODE
38 ACCESS CODE
38 ACCESS CODE
1:ALL
38 ACCESS CODE
2:FAX PARA.
SET and follow the procedure above to step
.
(1-4)
NO.=
1234
1234
1234
95