Panasonic DP-2000 Operating Instructions Manual page 44

BASIC OPERATIONS
Sending Documents
4
The document(s) begin to store into memory with a file
number.
Then starts dialing the telephone number immediately
after storing the first page. (See Note 3)
The remaining page(s) continue to store into memory.
NOTE
1. If you need a special access number to get an outside line, dial it first then press
(represented by a "-") before dialing the full number.
Ex
: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, press
TONE
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex
: 9 PAUSE TONE 5551234
3. This feature is called "Quick Memory Transmission". If you wish to store All the document(s) into memory first
before transmitting, change the Fax Parameter No. 082 (QUICK MEMORY XMT) to " Invalid". (See page 32)
4. This field (Auto, Line-1 or Line-2) appears only when the 2nd G3 Fax Communication Port Option is installed.
42
(represented by a "/").
* STORE * NO.002
PAGES=001 05%
* DIALING * NO.002
5551234
PAUSE to enter a pause