Table of Contents
Advertisement
Administrator Setup
Setup/Admin
Rec/Play
Programed Rec
Date/Time
Registration
Trigger
OSD
Camera
Management Mode
Setup/Admin
Radar/GPS
File Management
Auto Maintenance
Service
Rec/Play
PowerOff Time
Use this function to set the interval
after which the Memory Card Video
Recorder and this unit will shut down
after the ignition switch has been set
to the LOCK (OFF) position.
Setting (min.):
0/10/20/30/60/90/120/180
Init Camera Select
Select the camera selected at power-on.
1:
Color Camera connected to
the [CAMERA1] connector
2:
Commercially available camera
connected to the [CAMERA2]
connector
LAST: See footnote.
∗1 Applies the setting in effect when power was last turned off. Unless power is
turned off properly, the operating state may not be saved correctly.
∗2 Normal recording records 10 or 30 video and audio frames per second.
32
(continued)
[1/2]
[2/2]
∗
1
Init Audio2 In Select
Select the Audio2 input selected at
power-on.
INCAR : Input signal of the [IN CAR
MIC] connector
WMIC : Input signal of the [AUDIO
IN 2] connector
LAST : See footnote.
PowerOn Rec
Use this function to set recording to
start when the Memory Card Video
Recorder is turned on.
Setting : ON/OFF
Loop Rec
Use this function to record new data
by deleting the oldest files when there
is no free space left on a P2 card.
Setting : ON/OFF
Intermittent Rec
Use this function to record
video frame per second.
Setting : ON/OFF
Resolution/RecRate
Use this function to set the screen
resolution and the recording rate.
Q-512kbps :
320X240 512 kbps 30 fps
Q-1Mbps :
320X240
1 Mbps 30 fps
F-1Mbps :
720X480
1 Mbps 10 fps
F-2Mbps :
720X480
2 Mbps 30 fps
∗
1
∗
2
one
Advertisement
Chapters
Table of Contents
