Management Mode; Radar/Gps - Panasonic AG-RCP30P Operating Instructions Manual

P2 remote control panel, car use only
Hide thumbs Also See for AG-RCP30P:
Table of Contents

Advertisement

Administrator Setup

Management Mode

Management of Officer Setup
Setting Method
Use one of the following methods to
enter officer data.
AUTO
: Automatically reads and
loads officer data for up to
two persons from a USB
memory device.
MANUAL : Display the menu on the
LCD panel, and then read
in and configure officer
data from a USB memory
device on the Officer setup
top screen.
LIST
: Display the menu on the
LCD panel and allow you
to set the officer data by
selecting from the list
on the Officer setup top
screen after reading in
the officer data already
stored on the Memory
Card Video Recorder.
Operation Key Lock
This function locks buttons other
than the [REC], [MENU], [CONTROL
PANEL ON/OFF] and [RETURN]
buttons, the [REC] button on the
Memory Card Video Recorder,
and the [REC] button on the Color
Camera.
Setting : ON/OFF
Notes:
• When a USB memory device
containing administrator data is
connected, you can press the
[MENU] button to enter the Setup/
Admin top screen via the menu
items. Set [Management Mode]
– [Operation Key Lock] setting to
"OFF" in administrator setup to
release key lock.
38
(continued)
• The key lock is activated for the
first time when you move to the
live screen.
• The [LOCK] lamp indicates
whether the keys are locked.
• Although the key lock function is
available in officer setup, when
locked by administrator setup, the
keys cannot be unlocked from
officer setup.
• The Color Camera zoom and
brightness buttons cannot be
locked.

Radar/GPS

Radar Model
Baud Rate
Setting (bps) : 1200/2400/
Bit Length
Setting (bit) : 7/8
Stop Bit
Setting (bit) : 1/2
Parity
Setting : NON/ODD/EVEN
Model Select
The unit is set to support Kustom
Signal's ProLaser3 as standard. To
use the unit with other radar guns,
consult your supplier.
Addition of Model
Consult your supplier.
If you open the Addition of Model
screen by mistake, press the
[Cancel] button to exit.
4800/9600/
19200/38400

Advertisement

Table of Contents
loading

Table of Contents