Auto Maintenance - Panasonic AG-RCP30P Operating Instructions Manual

P2 remote control panel, car use only
Hide thumbs Also See for AG-RCP30P:
Table of Contents

Advertisement

Administrator Setup

Auto Maintenance

During continuous operation, the
Memory Card Video Recorder restarts,
checks files and frees memory at regular
intervals to maintain system health.
When the unit is regularly turned off,
auto maintenance is not required.
To use the unit without having to
regularly power it off, activate auto
maintenance with intervals as short as
possible.
A dialog announcing the start of auto
maintenance appears 10 to 20 seconds
before start of maintenance. In this
interval, you can use the [CONTROL
PANEL ON/OFF], [REC], [STOP],
[RETURN] or [
maintenance. Auto maintenance starts
unless it is canceled.
Auto maintenance is started or
canceled when planned maintenance
date and time is reached under the
following conditions.
< Execution >
• When recording stops
• Maintenance is held for a maximum
of 90 minutes and recording is
stopped in that interval.
• When loop recording is set to "ON"
or intermittent recording is performed
at a time other than programmed
recording (intermittent recording
stops and maintenance starts)
• During file restore operation and
when Administrator Setup is
performed (maintenance starts
when respective process ends)
• During playback (maintenance
starts when playback ends)
< Cancel >
• When recording continues beyond
90 minutes
• When the P2 card slot cover is open
(continued)
] buttons to cancel
Notes:
• To start recording immediately after
the end of auto maintenance, set
power ON recording to "ON".
• When auto maintenance is completed,
the unit is restarted and left in the
power on state. Set the following
items to "LAST" in Administrator
Setup when auto maintenance
is set to "ON", to prevent a restart
from changing the settings used
before power was last turned off.
Set a value other than "LAST" to set
a fixed value.
< Rec/Play >
• Init Camera Select
• Init Audio2 In Select
• Init Audio2 Rec
• Init On Screen Type
• Init Audio Out (Play)
< Camera >
• Init Backlight
• Init AE Shift
• Init Camera LED
• Init IR Mode
41

Advertisement

Table of Contents
loading

Table of Contents